Concrete floors in
New Site
AL
New Site is one of the towns we have run tooling in for years, north of Dadeville.
Get my free quoteFree quote . No obligation . Fast response
What New Site usually asks for
Those get asked for most often around New Site, though the right answer is always the room in front of us. Every system we install is available here, and the right one is chosen from the slab in front of us rather than from a list.
Metallic Epoxy
In New Site, metallic epoxy is a frequent answer, largely down to rural homes and shop buildings on acreage.
This is the service where the owner’s hand shows most. There is no repeating it exactly, which is the appeal and also why it gets discussed before the first bucket is opened.
It reads best where light can travel across it. A room with windows down one wall will show movement a windowless room will not.
Under the clear coat it cleans up like any other resin floor. Every floor is unique. That is inherent to how it is installed, not a marketing line.
More on metallic epoxy
Concrete Resurfacing
With farmland and timber driving the town, concrete resurfacing earns its place in New Site.
It is not a fix for a slab that has failed. If sections have dropped or a crack keeps moving with the seasons, that is a subgrade problem and an overlay will mirror it. We say so when we see it.
Once the overlay has cured it can be stained, sealed, or textured, so a driveway that was only ever gray can come back as something else entirely.
Surface spalling, scaling, and pitting go away. It gives you a clean canvas for stain or a coating.
More on concrete resurfacing
Non Slip Treatments
Given rural homes and shop buildings on acreage, non slip treatments suits a lot of what we see in New Site.
It can go into most of the finishes we install, so a pool deck or a kitchen does not have to choose between looking right and being safe underfoot.
Grip comes from aggregate suspended in the top coat. Aluminum oxide or graded quartz, sized to the job, so the texture is built into the finish instead of taped on top of it.
Grit grade is chosen for the room rather than applied by default. It goes over existing coated and polished floors as well as new work.
More on non slip treatments
New Site and the floors in it
New Site is north of Dadeville, inside the 100 miles we work out of Huntsville.
The concrete under New Site is rural homes and shop buildings on acreage, which tells us where to expect sealer, glue or an old coating.
What gets built here follows farmland and timber, and that decides what needs finishing.
Work in New Site usually lands alongside jobs in Alexander City, Dadeville, Tallassee.
New Site is known locally for farmland and timber, and the buildings that come with it are the ones we end up in.
Retail and open commercial floors are usually better served by polishing than by a coating.
Other towns in Tallapoosa County
Everything we install
Polishing
Decorative
Restoration
Safety
The slab underneath
The thing we look for first on a New Site slab is moisture. Concrete on grade can pass vapor upward for its whole life, and a sealed coating over an active slab lifts eventually no matter who installed it.
The prep on a good floor takes longer than the coating does.
Skipping prep is how a floor looks good for one season and lets go in the next.
We quote the floor first, in person. Once you accept, the install gets booked as a block rather than squeezed between other jobs, because a resin floor cannot be half finished and left overnight. For a New Site job that usually means we hold consecutive days and give you the dates up front.
Clear the room before we arrive. For a garage that means everything off the floor, including shelving feet and anything mounted low on the wall that we need to cut in behind. We can work around a few heavy items, but the more of the slab that is open, the better the edges come out.
Grinders and vacuums pull real current. Most New Site homes have enough, but older properties sometimes do not, and we would rather find that out at the quote than on the morning. We bring our own equipment and dust extraction, so the mess stays far smaller than people expect.
Whatever the room is, the sequence does not change: open the concrete, fix what needs fixing, then put down the system the slab will actually hold.
Is New Site too far for you?
No. We work the whole of Tallapoosa County, and New Site is a routine run rather than an exception. There is no surcharge for the distance.
Which floors suit New Site properties?
Around here it is usually metallic epoxy, concrete resurfacing and non slip treatments, because the local stock is rural homes and shop buildings on acreage.
Can you handle a business floor in New Site?
We can. farmland and timber means New Site has working buildings, and those floors get specified around how they are cleaned and what runs across them.
How soon could you get to New Site?
Usually within a few days to look at it. We are often working Alexander City, Dadeville in the same stretch, so fitting New Site into a run is normally straightforward.
Can you quote over the phone for New Site?
We can give you a range so you know whether to go further, but the real figure comes after somebody has stood on the slab.
Do you have references near New Site?
Yes, and we try to match them to your job. Ask for the kind of floor you are considering and we will point you at one.
A floor in New Site?
Get Kortni out to look at it. (205) 238-8111.