Concrete floors in
Florence
AL
We cover Florence as part of the 100 miles we run out of Huntsville.
Get my free quoteFree quote . No obligation . Fast response
Florence and the floors in it
Florence is the largest of the Shoals cities, north of the Tennessee River, inside the 100 miles we work out of Huntsville.
The building stock we meet in Florence is historic districts, university adjacent rentals, and newer subdivisions, and that is what decides the system more than any preference does.
The town runs on the University of North Alabama and the Shoals music and manufacturing economy, and the buildings tied to that see the hardest use.
Florence sits close enough to Killen, Rogersville, Lexington that we frequently run them together.
Situated the largest of the Shoals cities, north of the Tennessee River, Florence draws its character from the University of North Alabama and the Shoals music and manufacturing economy.
Where the floor is already coated and failing, the job starts with taking the old system off.
What Florence usually asks for
Those get asked for most often around Florence, though the right answer is always the room in front of us. Every system we install is available here, and the right one is chosen from the slab in front of us rather than from a list.
Flake Epoxy Flooring
Given historic districts, university adjacent rentals, and newer subdivisions, flake epoxy flooring suits a lot of what we see in Florence.
The chip does real work beyond looks. It builds texture underfoot, and it hides the small variations in a slab that a solid color would put on display.
Flake goes on while the base coat is still wet. We broadcast it to refusal, which means we keep throwing chips until the floor will not take any more, then scrape back the loose material once it has set.
Blend choices run from near neutral greys to blues, greens, and browns. The texture gives you grip when the floor is wet, without feeling rough.
More on flake epoxy flooring
Polished Concrete
Given historic districts, university adjacent rentals, and newer subdivisions, polished concrete suits a lot of what we see in Florence.
A densifier goes down partway through the grit sequence. It reacts with the free lime in the slab and hardens the surface from within, which is what keeps a polished floor from dusting the way bare concrete does.
How the floor ends up looking depends on how deep we go. A light grind leaves the surface close to how it was poured. Going deeper opens the slab and exposes the sand, then the stone, so you get a terrazzo look out of concrete that was already there.
It reflects light, so a dim warehouse or basement gets noticeably brighter without new fixtures. Sweeping and an occasional damp mop is the entire maintenance routine.
More on polished concrete
Urethane Cement Flooring
In Florence, urethane cement flooring is a frequent answer, largely down to historic districts, university adjacent rentals, and newer subdivisions.
Urethane cement is a different animal from epoxy. It is thicker, it tolerates moisture in the slab that would blow an epoxy off, and it handles thermal shock, which is the real problem in a kitchen.
Thermal shock is what happens when a floor at room temperature gets hit with boiling water or a steam cleaner. The slab and the coating expand at different rates. Urethane cement is formulated to move with it.
It takes hot water, steam cleaning, and caustic wash down chemicals. It can go over slabs with moisture that would fail an epoxy.
More on urethane cement flooring
Concrete Resurfacing
Concrete resurfacing comes up in Florence because the stock here is historic districts, university adjacent rentals, and newer subdivisions.
Once the overlay has cured it can be stained, sealed, or textured, so a driveway that was only ever gray can come back as something else entirely.
An overlay is a thin layer of polymer modified cement bonded over the slab you already have. Structurally the old concrete keeps doing its job. The overlay gives you a fresh surface to finish.
Surface spalling, scaling, and pitting go away. It gives you a clean canvas for stain or a coating.
More on concrete resurfacing
The slab underneath
Slabs around Florence vary more than people expect, even within one neighborhood. Two houses on the same street can have concrete finished completely differently, which changes the prep.
Surface prep is where the money goes on a floor that holds up.
Skipping prep is how a floor looks good for one season and lets go in the next.
Sometimes the honest answer is that a slab is not worth coating. If a crack is still moving, if sections have dropped, or if there is water coming up through the concrete with nowhere to go, a coating will fail and take your money with it. We would rather tell you that in Florence than sell you a floor twice.
We quote the floor first, in person. Once you accept, the install gets booked as a block rather than squeezed between other jobs, because a resin floor cannot be half finished and left overnight. For a Florence job that usually means we hold consecutive days and give you the dates up front.
Clear the room before we arrive. For a garage that means everything off the floor, including shelving feet and anything mounted low on the wall that we need to cut in behind. We can work around a few heavy items, but the more of the slab that is open, the better the edges come out.
Whatever the room is, the sequence does not change: open the concrete, fix what needs fixing, then put down the system the slab will actually hold.
Other towns in Lauderdale County
Everything we install
Polishing
Decorative
Restoration
Safety
Is Florence too far for you?
No. We work the whole of Lauderdale County, and Florence is a routine run rather than an exception. There is no surcharge for the distance.
What do you install most around Florence?
Mostly flake epoxy flooring, polished concrete, urethane cement flooring and concrete resurfacing. That follows the building stock here more than anything else, and your floor may point somewhere different once we have looked at it.
Do you do commercial work in Florence?
Yes, and it is a real part of what we do here. With the University of North Alabama and the Shoals music and manufacturing economy locally, there are buildings whose floors have to survive a cleaning routine, not just look right.
How soon could you get to Florence?
Usually within a few days to look at it. We are often working Killen, Rogersville in the same stretch, so fitting Florence into a run is normally straightforward.
Can you quote over the phone for Florence?
We can give you a range so you know whether to go further, but the real figure comes after somebody has stood on the slab.
Do you have references near Florence?
Yes, and we try to match them to your job. Ask for the kind of floor you are considering and we will point you at one.
A floor in Florence?
Get Kortni out to look at it. (205) 238-8111.