Concrete floors in
Southside
AL
Most of what we see in Southside is lake and river homes plus newer subdivisions, and that shapes which finish makes sense.
Get my free quoteFree quote . No obligation . Fast response
What Southside usually asks for
Those are the ones that come up most in Southside. Everything else we install is available here too. Every system we install is available here, and the right one is chosen from the slab in front of us rather than from a list.
Flake Epoxy Flooring
In Southside, flake epoxy flooring is a frequent answer, largely down to lake and river homes plus newer subdivisions.
The chip does real work beyond looks. It builds texture underfoot, and it hides the small variations in a slab that a solid color would put on display.
Flake goes on while the base coat is still wet. We broadcast it to refusal, which means we keep throwing chips until the floor will not take any more, then scrape back the loose material once it has set.
Blend choices run from near neutral greys to blues, greens, and browns. The texture gives you grip when the floor is wet, without feeling rough.
More on flake epoxy flooring
Urethane Cement Flooring
With Neely Henry Lake recreation driving the town, urethane cement flooring earns its place in Southside.
Urethane cement is a different animal from epoxy. It is thicker, it tolerates moisture in the slab that would blow an epoxy off, and it handles thermal shock, which is the real problem in a kitchen.
Thermal shock is what happens when a floor at room temperature gets hit with boiling water or a steam cleaner. The slab and the coating expand at different rates. Urethane cement is formulated to move with it.
It can go over slabs with moisture that would fail an epoxy. Cove base and the right slope mean water goes to the drain rather than sitting.
More on urethane cement flooring
Non Slip Treatments
In Southside, non slip treatments is a frequent answer, largely down to lake and river homes plus newer subdivisions.
It can go into most of the finishes we install, so a pool deck or a kitchen does not have to choose between looking right and being safe underfoot.
Grip comes from aggregate suspended in the top coat. Aluminum oxide or graded quartz, sized to the job, so the texture is built into the finish instead of taped on top of it.
Grit grade is chosen for the room rather than applied by default. It goes over existing coated and polished floors as well as new work.
More on non slip treatments
Southside and the floors in it
Southside is south of Gadsden along the Coosa, inside the 100 miles we work out of Huntsville.
Southside is largely lake and river homes plus newer subdivisions, so the slabs we see there have a family resemblance.
Because of Neely Henry Lake recreation, there is a steady mix of residential and working buildings.
Being near Gadsden, Attalla, Rainbow City means we are through this part of Etowah County regularly.
Southside sits south of Gadsden along the Coosa. Locally the draw is Neely Henry Lake recreation.
New construction gets a different conversation than a thirty year old slab, mostly about timing and moisture.
Everything we install
Polishing
Decorative
Restoration
Safety
The slab underneath
What is already on a Southside floor matters as much as the concrete underneath. Paint, glue, sealer and old coatings all come off mechanically first.
We grind before anything else, which opens the concrete so the resin has something to hold.
Every floor starts with diamond grinding. Nothing bonds to a slab that is still sealed or dusty.
You stay off the floor overnight after the top coat. Foot traffic is usually fine the next day; vehicles need longer, and exactly how much longer depends on the product and how warm the slab is. We give you real numbers before we start rather than a stock answer.
Interior work in Southside runs year round because the building is conditioned. Exterior slabs, porches, patios and pool decks get scheduled against the forecast, since resin cures chemically and a cold or soaking slab changes how that goes.
Sometimes the honest answer is that a slab is not worth coating. If a crack is still moving, if sections have dropped, or if there is water coming up through the concrete with nowhere to go, a coating will fail and take your money with it. We would rather tell you that in Southside than sell you a floor twice.
Whatever the room is, the sequence does not change: open the concrete, fix what needs fixing, then put down the system the slab will actually hold.
Do you actually take jobs in Southside?
We do. Etowah County is part of our normal area and Southside is inside it. The same people who quote it install it.
What kind of work comes out of Southside?
Typically flake epoxy flooring, urethane cement flooring and non slip treatments. Southside is lake and river homes plus newer subdivisions, and that is what drives the pattern.
Can you handle a business floor in Southside?
We can. Neely Henry Lake recreation means Southside has working buildings, and those floors get specified around how they are cleaned and what runs across them.
How soon could you get to Southside?
Usually within a few days to look at it. We are often working Gadsden, Attalla in the same stretch, so fitting Southside into a run is normally straightforward.
Is there a charge to come look at a Southside floor?
No, not inside our service area, and Southside is inside it. The visit is how we find out what the floor actually needs.
Can I talk to a previous customer?
Yes. We would rather give you somebody whose floor is like yours than a general list, so tell us what you are planning.
A floor in Southside?
For a floor in Southside, start with a call to (205) 238-8111.