Concrete floors in
Vincent
AL
We have been finishing floors around Vincent long enough to know which slabs in town give trouble.
Get my free quoteFree quote . No obligation . Fast response
What Vincent usually asks for
Those are the ones that come up most in Vincent. Everything else we install is available here too. Every system we install is available here, and the right one is chosen from the slab in front of us rather than from a list.
Polished Concrete
Polished concrete comes up in Vincent because the stock here is rural homes and industrial buildings.
A densifier goes down partway through the grit sequence. It reacts with the free lime in the slab and hardens the surface from within, which is what keeps a polished floor from dusting the way bare concrete does.
How the floor ends up looking depends on how deep we go. A light grind leaves the surface close to how it was poured. Going deeper opens the slab and exposes the sand, then the stone, so you get a terrazzo look out of concrete that was already there.
Sweeping and an occasional damp mop is the entire maintenance routine. Nothing to reapply. There is no wax and no topcoat to peel.
More on polished concrete
Urethane Cement Flooring
Vincent asks about urethane cement flooring often, and rural homes and industrial buildings is the reason.
Urethane cement is a different animal from epoxy. It is thicker, it tolerates moisture in the slab that would blow an epoxy off, and it handles thermal shock, which is the real problem in a kitchen.
Thermal shock is what happens when a floor at room temperature gets hit with boiling water or a steam cleaner. The slab and the coating expand at different rates. Urethane cement is formulated to move with it.
Cove base and the right slope mean water goes to the drain rather than sitting. It takes hot water, steam cleaning, and caustic wash down chemicals.
More on urethane cement flooring
Non Slip Treatments
In Vincent, non slip treatments is a frequent answer, largely down to rural homes and industrial buildings.
It can go into most of the finishes we install, so a pool deck or a kitchen does not have to choose between looking right and being safe underfoot.
Grip comes from aggregate suspended in the top coat. Aluminum oxide or graded quartz, sized to the job, so the texture is built into the finish instead of taped on top of it.
Traction where floors get wet, greasy, or see a lot of feet. Grit grade is chosen for the room rather than applied by default.
More on non slip treatments
Vincent and the floors in it
Sitting on the Shelby and Talladega county line, Vincent is a normal run for us rather than a special trip.
The concrete under Vincent is rural homes and industrial buildings, which tells us where to expect sealer, glue or an old coating.
Because of a cement plant and Logan Martin Lake, there is a steady mix of residential and working buildings.
We are often in Talladega, Sylacauga, Childersburg in the same week, so scheduling around Vincent is rarely a problem.
Between a cement plant and Logan Martin Lake and the housing that supports it, Vincent keeps a steady amount of concrete going down.
New construction gets a different conversation than a thirty year old slab, mostly about timing and moisture.
Everything we install
Polishing
Decorative
Restoration
Safety
The slab underneath
The thing we look for first on a Vincent slab is moisture. Concrete on grade can pass vapor upward for its whole life, and a sealed coating over an active slab lifts eventually no matter who installed it.
Every floor starts with diamond grinding. Nothing bonds to a slab that is still sealed or dusty.
Grinding also shows us what the slab is actually like under whatever is on it.
Interior work in Vincent runs year round because the building is conditioned. Exterior slabs, porches, patios and pool decks get scheduled against the forecast, since resin cures chemically and a cold or soaking slab changes how that goes.
Sometimes the honest answer is that a slab is not worth coating. If a crack is still moving, if sections have dropped, or if there is water coming up through the concrete with nowhere to go, a coating will fail and take your money with it. We would rather tell you that in Vincent than sell you a floor twice.
We quote the floor first, in person. Once you accept, the install gets booked as a block rather than squeezed between other jobs, because a resin floor cannot be half finished and left overnight. For a Vincent job that usually means we hold consecutive days and give you the dates up front.
Whatever the room is, the sequence does not change: open the concrete, fix what needs fixing, then put down the system the slab will actually hold.
Do you actually take jobs in Vincent?
We do. Talladega County is part of our normal area and Vincent is inside it. The same people who quote it install it.
What do you install most around Vincent?
Mostly polished concrete, urethane cement flooring and non slip treatments. That follows the building stock here more than anything else, and your floor may point somewhere different once we have looked at it.
Do you do commercial work in Vincent?
Yes, and it is a real part of what we do here. With a cement plant and Logan Martin Lake locally, there are buildings whose floors have to survive a cleaning routine, not just look right.
When can you start in Vincent?
Depends where the schedule is, and we will tell you honestly. Being near Talladega, Sylacauga means we pass through this part of Talladega County often.
Can you quote over the phone for Vincent?
We can give you a range so you know whether to go further, but the real figure comes after somebody has stood on the slab.
Can I talk to a previous customer?
Yes. We would rather give you somebody whose floor is like yours than a general list, so tell us what you are planning.
A floor in Vincent?
If it is concrete and it is in Vincent, we can tell you what to do with it. (205) 238-8111.